The Bolt Anchor FBN II is a dependable steel anchor designed for cost effective fixations in non-cracked concrete. Its long thread, flexible installation options, and reliable expansion mechanism make it suitable for a wide range of structural and industrial applications.
| Parameter | Details |
|---|---|
|
Product Name
|
Bolt Anchor FBN II
|
|
Product Type
|
Steel anchor
|
|
Brand |
Fischer
|
|
Category |
Bolt Anchors FBN II, Fischer
|
|
Suitable Base Material
|
Non-cracked concrete
|
|
Approved For
|
Concrete C20/25 to C50/60, for non-cracked concrete
|
|
Also Suitable For
|
Concrete C12/15, natural stone with dense structure
|
|
Installation Types
|
Pre-positioned, push-through, stand-off installation under certain conditions
|
|
Outdoor Suitability
|
Stainless steel variant suitable for outdoor applications
|
|
Key Strength
|
Cost effective structural anchoring
|
|
Supplied By
|
Trusted fischer dealers in India
|
This product is available in multiple sizes to support different installation and fixing requirements.
8MMx70MM, 8MMx90MM, 8MMx110MM, 0MMx85MM, 10MMx95MM, 10MMx105MM, 10MMx125MM, 12MMx104MM, 12MMx114MM, 12MMx124MM, 12MMx144MM
The Bolt Anchor FBN II is widely used across structural, commercial, and industrial installation work.
The FBN II is compatible with pre-positioned and push-through installation. It is also suitable for stand-off installation under certain conditions.
Before installation, the hexagon nut should be placed in the optimal position, with the drive-in pin projecting approximately 3 mm out of the hexagon nut.
When torque is applied, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall. The head embossing offers a simple control of the anchoring.
For series installation, the use of the FABS or FA-ST II bolt anchor setting tools is recommended.
| Parameter | Details |
|---|---|
|
Anchor Name
|
Bolt Anchor FBN II
|
|
Anchor Diameter / Length Variants
|
8MMx70MM, 8MMx90MM, 8MMx110MM, 10MMx85MM, 10MMx95MM, 10MMx105MM, 10MMx125MM, 12MMx104MM, 12MMx114MM, 12MMx124MM, 12MMx144MM
|
|
Base Material Approval
|
Concrete C20/25 to C50/60, for non-cracked concrete
|
|
Additional Suitable Materials
|
Concrete C12/15, natural stone with dense structure
|
|
Installation Methods
|
Pre-positioned, push-through, stand-off under certain conditions
|
|
Expansion Action
|
Cone bolt pulls into expansion clip and expands against drill hole wall
|
|
Outdoor Use
|
Stainless steel variant suitable
|
|
Setting Tool Recommendation
|
FABS or FA-ST II for series installation
|
