Blog Article

Jigsaws square measure ideal for cutting curves and complicated shapes in wood. They additionally work well for creating short crosscuts on board and finishing within corner cuts that you simply begin with a buzz saw. Jigsaws aren’t sensible for creating quick, long, straight cuts. Use a buzz saw instead. once cutting wood, How To Use Bosch Jigsaw Blade? follow these guidelines:

How To Use Bosch Jigsaw Blade?

1. Jigsaws work best for cutting softwood that’s not quite 1-1/2 in. thick and hardwood up to 3/4 in. thick. Jigsaw blades tend to bend once cutting curves in thicker boards, departure a beveled edge instead of a situation. To stay the cut sq., use a pointy blade and avoid forcing the saw through the cut.
2. To “plunge cut,” that is, build associate entry saw withdraw the center of your wood, tip the jigsaw so that the blade is parallel to the work, and therefore the saw’s weight rests on the front lip of the shoe. Begin the saw at most speed, tilt the shoe, and steadily lower the stabbing blade into the wood. I sometimes reserve plunge-cutting for rough work so that associate errant blade doesn’t slash and mar expensive woods. In fragile material, drill a 1/2-in. starter hole to soundly position the blade for a cut.
3. For fast cutting, use a coarser blade. However note that the coarser the blade, a lot of sanding later.

Most wood-cutting blades for jigsaws square measure designed that the teeth cut on the stroke. For fine work tight less chipping—in wood veneers, for example—choose a “down stroke-cutting” blade. An alternate is to put painters or masking paper on the cutting line path before drawing on the pattern line.