Universal high performance injection mortar for demanding anchoring and rebar applications
Injection Mortar FIS V Plus is a high performance, styrene-free vinyl ester hybrid solution designed for demanding fixing applications in cracked and non-cracked concrete as well as masonry. It supports reliable anchoring, rebar connections, and special system applications, while offering long service life, flexible processing options, and dependable performance even in harsh site conditions.
| Parameter | Details |
|---|---|
|
Product Type |
Injection Mortar FIS V Plus
|
|
Product Type
|
2-component injection mortar
|
|
Mortar Type
|
Styrene-free vinyl ester hybrid mortar
|
|
Brand |
fischer |
|
System Concept
|
Resin and hardener stored separately and mixed during extrusion
|
|
Application Method
|
Extruded through static mixer into drill hole
|
|
Reusability |
Partially used cartridges can be reused by changing the static mixer
|
|
Suitable Conditions
|
Water-filled drill holes, harsh environmental conditions
|
|
Service Life Assessment
|
ETA assessment for 100 years
|
|
Variants Mentioned
|
FIS V Plus, FIS VS Plus Low Speed, FIS VW Plus High Speed
|
| Model | Volume | Packaging Type |
|---|---|---|
|
FIS V Plus
|
Universal all-rounder for highest requirements
|
General anchoring and fixing applications
|
|
FIS VS Plus Low Speed
|
Extended processing time
|
Higher processing temperatures or greater drill hole depth
|
|
FIS VW Plus High Speed
|
Shorter hardening time
|
Swift work progress at low temperatures
|
This product is used across structural, industrial, and installation-based fixing applications where approved chemical anchoring is required.
| Parameter | Details |
|---|---|
|
Concrete |
Concrete C12/15 to C50/60, cracked and non-cracked
|
|
Hollow blocks made from lightweight concrete
|
Approved |
|
Hollow blocks made from concrete
|
Approved
|
|
Vertically perforated brick
|
Approved |
|
Perforated sand-lime brick
|
Approved |
|
Solid sand-lime brick
|
Approved |
|
Aerated concrete
|
Approved |
|
Solid brick
|
Approved |
| Parameter | Details |
|---|---|
|
Rebar connections
|
Approved |
|
Remedial wall tie VBS 8
|
Approved |
|
Weather facing reconstruction system FWS II
|
Approved |
|
Stand-off installation TherMax II
|
Approved |
The Injection Mortar FIS V Plus works through a 2-component injection process based on a vinyl ester hybrid concept. Resin and hardener are stored separately inside the cartridge and remain unmixed until extrusion through the static mixer. Once dispensed, the mortar flows bubble free from the base of the drill hole, helping achieve full-surface bonding between the anchor and drill hole wall. This creates a secure bond while also sealing the hole. The cartridges are designed for quick and convenient use with fischer dispensers, and partially used cartridges can be reused simply by replacing the static mixer.
| Parameter | Details |
|---|---|
|
Product Type
|
2-component injection mortar
|
|
Chemical Base
|
Vinyl ester hybrid concept
|
|
Styrene-Free
|
Yes |
|
Mixing Method
|
Through static mixer during extrusion
|
|
Extrusion Quality
|
Bubble free from drill hole base
|
|
Bonding Action
|
Bonds entire surface of anchor with drill hole wall
|
|
Drill Hole Sealing
|
Yes
|
|
Cartridge Use
|
Quick and easy with fischer dispensers
|
|
Cartridge Reuse
|
Yes, by changing the static mixer
|
|
Temperature-Specific Variant
|
FIS VW Plus High Speed for low temperatures
|
|
Extended Working Time Variant
|
FIS VS Plus Low Speed for high temperatures or large drill hole depths
|
|
Special Condition Approval
|
Approved for water-filled drill holes
|
|
Service Life
|
ETA assessment for 100 years
|
The Injection Mortar FIS V Plus has numerous system approvals covering cracked and non-cracked concrete, masonry, and special applications. It also carries an ETA assessment for a service life of 100 years, supporting long-term safety and reliability in approved construction and anchoring applications.
Below is the functional application sequence based strictly on the product details provided.
